Electrical panel upgrades can be costly, but not when you hire a professional. Most electricians charge $40 – $ hundred for an initial visit, with some charging even more. A full panel installation usually takes at least 8 hours and can take days, depending on where the wiring is located and if it requires to be updated. If you decide to do it yourself, be prepared for a long weekend or possibly a few months before the work is complete. I suggest using a qualified electrician to make sure it’s done right the first time.
The most common way to replace your electrical panel is replacing the existing circuit breakers with new ones. There are basically three types to choose from single circuit breakers, variable-pressure relays, and contact-less circuit breakers. Your new panel will come with all these components and wiring already attached at the time of your purchase, but for an additional fee, you can upgrade the terminals too. In most cases, you’ll only be paying for the new panel anyway, so this is probably not a huge expense.
The location and size of your fuse box are also going to determine the size of the electrical panel upgrade you need to purchase. Fuse boxes can be expensive to buy new, and in many cases, they cannot safely handle the increased electrical load. It is recommended that you upgrade your fuse box replacements with high-quality units with a long life span. This will cost a little extra, but it will save you money in the long run and protect your electrical equipment.
If you decide to get a higher capacity fuse box, then the size of amp service panel upgrades you purchase will increase. The majority of customers will want to purchase the largest capacity available. You might also want to consider a few additional amps for your lights and other items. The decision all depends on how much further ahead in time you plan to take your amp service panel upgrades.
Electrical panel replacement needs will change depending on your location. Most electricians near you should tell you how to locate your existing wiring to the existing panels. If you aren’t sure where your wiring is located, ask your electrician for help. They should be able to help you figure out how to reconfigure your wiring so that your panels match. With careful planning, your electricians near you should be able to help you with your wiring job and get you up and running in no time.
Power strips are important to the operation of many electrical systems, so they can also be problematic when electrical panel upgrades are involved. Sometimes the power strip is installed when the electrical panel is installed, so it’s always best to make sure your electrician can safely install the power strips. If he can’t, he may be able to point you in the direction of another contractor who can install them correctly. Power strips are often difficult to replace, but your electrician should know how to install and replace them for you.
Many older systems are harder to work with than modern systems, and you may have trouble updating if you’re dealing with an older electrical panel. This can be especially problematic if the equipment dates back several years. In some cases, you won’t even be able to find replacement panels that will work. Trying to upgrade your equipment without replacing your old ones is like trying to navigate through a new city without using a map. It can be extremely frustrating.
Electrical panel replacement isn’t a piece of cake by any means. It can easily take one or more trips to your local service center. With labor rates as high as they are in many parts of the country, you could easily spend several hundred dollars on your project. That’s assuming that you get the job done in a timely fashion. By purchasing online, you can often get an incredible deal and the products shipped directly to your house, saving you money on labor costs and avoiding the expense of having to rent boxes at the warehouse.